Dell Inspiron 20 (3048, Early 2014) - Manual (Page 75)

Removing the Camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Follow the procedure from step 1 to step 5 in “Removing the Stand
Assembly ”.
2 Remove the back cover .
3 Follow the procedure from step 1 and step 2 in “Removing the Optical
Drive ”.
4 Remove the system-board shield .
5 Remove the VESA-mount bracket .
Procedure
1 Disconnect the camera cable from the system board and remove the
camera cable from the routing guides on the display-panel base.
2 Disconnect the speaker cable from the system board and remove the
speaker cable from the routing guides on the display-panel base.
3 Disconnect the control-buttons board cable from the control-buttons
board.
75