Dell Inspiron 20 (3048, Early 2014) - Manual (Page 43)

Removing the Antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Follow the procedure from step 1 to step 5 in “Removing the Stand
Assembly ”.
2 Remove the back cover .
3 Remove the system-board shield .
Procedure
1 Note the routing of the camera cable and remove it from the routing
guides on the display-panel base.
2 Note the location of the antennas and pry the antennas from the display-
panel base.
3 Note the routing of the antenna cables and disconnect the antenna
cables from the wireless card.
4 Remove the antenna cables from under the camera cable.
43