Replacing the system-board shield, Procedure, Post-requisites – Dell Inspiron 20 (3048, Early 2014) User Manual
Page 42
Advertising
Replacing the System-Board
Shield
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the slots on the system-board shield into the ports on the system
board.
2 Align the screw holes on the system-board shield with the screw holes
on the display-panel base.
3 Replace the screws that secure the system-board shield to the display-
panel base.
Post-requisites
1
Replace the
.
2 Follow the procedure from step 3 to step 5 in “Replacing the
42
Advertising