Dell Inspiron 20 (3048, Early 2014) - Manual (Page 45)

Replacing the Antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align and adhere the antennas to the display-panel base.
2 Route the antenna cables under the camera cable and connect the
cables to the wireless card.
3 Route the camera cable through the routing guides on the display-panel
base.
Post-requisites
1 Replace the system-board shield .
2 Replace the back cover .
3 Follow the procedure from step 3 to step 5 in “Replacing the Stand
Assembly ”.
45