User accounts and fast user switching, Setting up a home and office network, Adding user accounts – Dell Latitude X300 User Manual

Page 112: Fast user switching, Connecting to a network adapter, Network setup wizard

Advertising
background image

3.

Click Finished and restart the new computer.

User Accounts and Fast User Switching

Adding User Accounts

 

After Windows XP is installed, the administrator or a user with administrator rights can create additional user accounts.

1.

Click the Start button and click Control Panel.

2.

In the Control Panel window, click User Accounts.

3.

Under Pick a task, click Create a new account.

4.

Under Name the new account, type the name of the new user and click Next.

5.

Under Pick an account type, click one of the following options:

l

Computer administrator — You can change all computer settings.

l

Limited — You can change only your own personal settings, such as your password. You cannot install programs or use the Internet.

6.

Click Create Account.

Fast User Switching

 

Fast User Switching allows multiple users to access one computer without requiring the previous user to log off.

1.

Click the Start button and click Log Off.

2.

In the Log Off Windows window, click Switch User.

 

When you use Fast User Switching, programs that previous users were using remain running in the background, so you might experience slower computer
activity. Also, multimedia programs, such as games and DVD software, might not work with Fast User Switching. For more information, see the

Windows Help

and Support Center

.

Setting Up a Home and Office Network

Connecting to a Network Adapter

 

Before you connect your computer to a network, the computer must have a network adapter installed and a network cable connected to it.

 

To connect a network cable:

1.

Connect the network cable to the network adapter connector on the back of your computer.

2.

Connect the other end of the network cable to a network connection device, such as a network wall jack.

Network Setup Wizard

 

The Microsoft

®

Windows

®

XP operating system provides a Network Setup Wizard to guide you through the process of sharing files, printers, or an Internet

connection between computers in a home or small office.

1.

Click the Start button, point to All Programs® Accessories® Communications, and then click Network Setup Wizard.

NOTE:

Additional options may be available, depending on whether you are using Windows XP Home Edition or Windows XP Professional. Also, options

available in Windows XP Professional vary depending on whether your computer is connected to a domain.

NOTE:

Fast User Switching is unavailable if the computer is running Windows XP Professional and is a member of a computer domain, or if the computer

has less than 128 MB of memory.

NOTE:

Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.

NOTE:

Do not use a network cable with a telephone wall jack.

Advertising