Dell Latitude X300 User Manual

Page 96

Advertising
background image

b.

 

Remove the module from the connector.

 

 

9.

Ground yourself and install the new memory module:

a.

 

Align the notch inthe module edge connrctor with the tab in the center of the connector slot.

b.

 

Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not hear the click,

remove the module and reinstall it.

 

 

10.

Replace the cover.

 

1

memory module

2

securing clips (2)

NOTE:

If the memory module is not installed properly, the computer may not not boot properly. No error message indicates this failure.

1

memory module

2

connector

NOTICE:

If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.

Advertising