Pc card problems, If you cannot eject the cd or dvd/cd-rw drive tray, If the dvd/cd-rw drive stops writing – Dell Latitude X300 User Manual

Page 85: If you have problems with a hard drive

Advertising
background image

If you cannot eject the CD or DVD/CD-RW drive tray

 

If you hear an unfamiliar scraping or grinding sound

 

If the DVD/CD-RW drive stops writing

 

If you have problems with a hard drive

 

PC Card Problems

 

If a drive error message appears, see "

Error Messages

" for an explanation.

Run the IDE Drives tests as described in the Dell Diagnostics.

1.

 

Ensure that the computer is turned off.

2.

 

Straighten a paper clip and insert one end into the eject hole at the front of the drive; push firmly until the tray is partially ejected.

3.

 

Gently pull out the tray until it stops.

l

Ensure that the sound is not caused by the program that is running.

l

Ensure that the disk or disc is inserted properly.

 

Disable standby mode in Windows before writing to a CD-RW —

Search for the keyword standby or hibernate in Windows Help or the

Help

and Support Center

.

 

Change the write speed to a slower rate —

See the help files for your CD creation software.

 

Close all other open programs —

Closing all other open programs before writing to the CD-RW may alleviate the problem.

 

Allow the computer to cool before turning it on —

A hot hard drive may prevent the operating system from starting. Try allowing the

computer to return to room temperature before turning it on.

 

Check the drive for errors

l

Run the Windows error-checking tool:

1.

 

In Windows XP, click the Start button and click My Computer. In Windows 2000, double-click My Computer.

2.

 

Right-click the drive letter (local disk) that you want to scan for errors, and then click Properties.

3.

 

Click the Tools tab.

4.

 

Under Error-checking, click Check Now.

5.

 

Click Start.

l

Run the IDE Drives tests as described in the Dell Diagnostics.

 

Check the PC Card —

Ensure that the PC Card is properly inserted into the connector.

 

Ensure that the card is recognized by Windows

®

Double-click the Safely Remove Hardware (Unplug or Eject Hardware in Windows

2000) icon in the Windows taskbar. Ensure that the card is listed.

 

Run the PC Card diagnostics test —

See the documentation that came with the PC Card for instructions if a diagnostics test was provided

with the card.

 

Advertising