Dell PowerEdge VRTX - Manual (Page 134)

Figure 92. Converting the bottom mounting ear to right rack ear
1. mounting ear 2. cartridge
3. screws (2) 4. tabs on cartridge (2)
The mounting ears are converted to rack ears.
15. Attach the rack ears to the chassis. See Installing The Mounting Ears .
16. Reinstall the following:
a. control panel
b. cooling-fan assembly
c. cooling shroud
d. PCIe cage door
17. Close the system.
18. Reinstall the following:
a. blower module bay
b. blower modules
c. hard drives
d. server modules
19. Reconnect the enclosure to its electrical outlet and turn the enclosure on, including any attached peripherals.
20. Turn on the server modules using the operating system commands or the CMC.
21. If applicable, install the front bezel.
Installing the enclosure in a rack
To install the enclosure in a rack, see the rack documentation that shipped with your rack solution.
134