Dell PowerEdge VRTX - Manual (Page 78)

Figure 55. Removing and installing a CMC card
1. CMC card connector on system board 2. release tabs (2)
3. CMC card indicators (2) 4. CMC card
5. CMC card support bracket
Installing a CMC card
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1. Align the CMC card with the card support bracket, and holding the release tabs, slide it down the bracket.
2. Lower the CMC card into the CMC connector on the system board.
3. Lock the CMC card into the CMC connector by rotating the release tabs downward, until firmly seated.
4. Close the system.
PCIe cage
The PCIe cage consists of the following:
78