Qmark ST - Commercial Slope Top Convectors - Manual (Page 4)

TO REPAINT
The baked enamel finish was chosen to blend with interior
decor. If you wish to repaint the heaters, use high quality
household enamel. No primer is necessary. However, light
sanding is recommended. Do not use rubber base paint. Paint
heater front cover only. Do not paint heating element or
protector.
12/10
Part No. 5200-2595-001 ECR38672
LIMITED WARRANTY
All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of installation, except
heating elements which are warranted against defects in workmanship and materials for five years from date of installation. This warranty does not apply to damage from
accident, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or
maintained in violation of the product’s installation instructions. All claims for warranty work must be accompanied by proof of the date of installation.
The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred to return products
to Marley Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the nearest Marley authorized service cen-
ter or the Marley Engineered Products Service Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that
such repair or replacement is the exclusive remedy available from Marley Engineered Products.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM
THIS AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE
PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary from state to state.
For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328. Merchandise returned to the fac-
tory must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products. When requesting return authorization,
include all catalog numbers shown on the products.
HOW TO OBTAIN WARRANTY SERVICE AND
WARRANTY PARTS PLUS GENERAL INFORMATION
1. Warranty Service or Parts 1-800-642-4328
2. Purchase Replacement Parts 1-800-654-3545
3. General Product Information www.marleymep.com
Note: When obtaining service always have the following:
1. Model number of the product
2. Date of manufacture
3. Part number or description
470 Beauty Spot Rd. East
Bennettsville, SC 29512 USA
ST4X02500
ST4X03750
ST4X041000
ST4X051250
ST4X061500
ST4X082000
ST4X102500
250
250
250
250
250
250
250
500
750
1000
1250
1500
2000
2500
1706
2560
3412
4266
5120
6824
8532
4.2
6.3
8.3
10.4
12.5
16.7
20.8
2.4
3.6
4.8
6.0
7.2
9.6
12.0
2.1
3.1
4.2
5.2
6.3
8.3
10.4
1.4
2.2
2.9
3.6
4.3
5.8
7.2
1.0
1.6
2.1
2.6
3.1
4.2
5.2
28”
36”
48”
60”
72”
96”
102”
1.8
2.7
3.6
4.5
5.4
7.2
9.0
IMPORTANT INFORMATION
Amperage
120V BTU/Hr. Watts 208V 240V 277V 347V 480V
Total Heating
Capacity Catalog
Number*
Length
Nominal
Watt/Ft.
*Catalog number shown in above table will be followed by a three-digit suffix indicating voltage and phase
121 = 120V/1Ø
271 = 277V/1Ø
201 = 208V/1Ø 341 = 347V/1Ø
241 = 240V/1Ø 601 = 600V/1Ø
17 lbs
22 lbs
27 lbs
33 lbs
38 lbs
45 lbs
50 lbs
Ship
Wt.
Lbs.
.8
1.3
1.7
2.1
2.5
3.3
4.2
600V