Replacement parts for 56” & 60 – Qmark Specialty Ceiling Fans User Manual
Page 4
REF.
NO.
1
1A
2
3
4
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
DESCRIPTION
PART
NO.
QTY
“J” hook mounting bolt assembly
Wood screw hook
Cord 38” with 3 prong plug
Cord grip connector
Upper shackle
2100069A
2100070A
3100031A
3100032A
3100033A
2100072A
2100073A
*
*
*
2100102A
3100039A
2100076A
3100042A
3100044A
5
6
7
8
9
Rubber roller
Clevis pin
3/32 x 3/4” Cotter pin
1/4 x 1 1/2” Hex bolt assembly
1/4 x 1 1/8” Hex bolt assembly
10
11
12
13
14
12” Downrod pipe
Upper canopy, bell shaped
Lower canopy
Lower canopy rod seal
Lower canopy cowling shield
(
) Included in motor assembly.
(
) Standard hardware item, available locally.
*
Figure 7 - Replacement Parts List
Replacement Parts For 56” & 60”
Spray Proof 5610-1, 6010-1 and Agricultural 5611-1, 6011-1
2
3100044A
15
Metal disc
REF.
NO.
16
17
18
19
20
6
6
1
1
1
1
1
3
3
3
1
1
1
1
1
DESCRIPTION
PART
NO.
QTY
Condensation drain plug
10-24 x 3/8” Canopy set screw
Steel yoke
Capacitor screw
Capacitor (5610-1,5611-1,6010-1, 6011-1)
3100045A
*
2100078A
2100080A
2100141A
2100082A
2100083A
3200098A
4100052A
2100085A
2100086A
*
2100130A
2100131A
2100088A
21
22
23
24
Grounding screw assembly
Plastic cable clamp assembly
56” Blade (5610-1, 5611-1)
60” Blade (6010-1, 6011-1)
Blade pad
25
26
27
28
1/4” x 3/4” Blade screws
1/4” Blade lockwashers
56” Motor assembly (5610-1, 5611-1)
60” Motor assembly (6010-1, 6011-1)
Safety cable assembly
1
2100089A
29
Cable clamps
†
†
HOW TO OBTAIN WARRANTY SERVICE AND
WARRANTY PARTS PLUS GENERAL INFORMATION
1. Warranty Service or Parts
1-800-642-4328
2. Purchase Replacement Parts
1-800-654-3545
3. General Product Information
www.marleymep.com
Note: When obtaining service always have the following:
1. Model number of the product
2. Date of manufacture
3. Part number or description
Part No. 5200-2400-001
10/05
ECR 36666
4
470 Beauty Spot Rd. East
Bennettsville, SC 29512 USA
(
) Replacement set of 3 only, white in color.
†
LIMITED WARRANTY
All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of installation, except
the motor which is warranted against defects in workmanship and materials for three years from date of installation. This warranty does not apply to damage from acci-
dent, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or main-
tained in violation of the product’s installation instructions. All claims for warranty work must be accompanied by proof of the date of installation.
The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred to return prod-
ucts to Marley Engineered Products Service Center.Within the limitations of this warranty, inoperative units should be returned to the nearest Marley authorized ser-
vice center or the Marley Engineered Products Service Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is
agreed that such repair or replacement is the exclusive remedy available from Marley Engineered Products.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED
FROM THIS AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE
PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328. Merchandise returned to the
factory must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products. When requesting return autho-
rization, include all catalog numbers shown on the products.