Sony MDS-302 - Manual (Page 12)

Playing MDs
Playing an MD
Before vou begin, make sure you have connected the
recorder to an amplifier correctly and firmly as
indicated on page 5,
1 Turn on the amplifier and set the source selector to
MD recorder.
2 Press POWER to turn on the recorder.
The ON/STANDBY indicator changes from red to
green.
3 Insert the .MD with the label side up and the arrow
pointing toward the opening into the disc
compartment until the recorder grips it.
If you insert the MD while the recorder is off, the
recorder will turn on automatically.
"Welcome" appears in the display.
The disc name appears, followed by the total
number of tracks (Tr) and total disc playing time.
A music calendar showing all the track numbers
appears within a grid if the MD is a premastered
disc, or without a grid if the MD is a recordable
disc.
If the total track number exceeds 23, ► appears to
the right of number 25 in the music calendar.
To label a recordable disc and its tracks, see
"l.abeling Recordings" on page 23.
4 Press O.
The MD starts playing.
The current track number, tri.cK title (if labeled), and
elapsed plaving time ol the current track light up in
the display.
To stop playback
Press ■.
When you want to Do the following;
Pause Press II
Resume play after pause Press O or II
Go to the next track Turn AMS clockwise (or
press on the remote)
Go back to the preceding track Turn AMS
counterclockwise (c^r
press \« on the remote)
Remove the MD Press ^ E)HCT
'(D' You can locate and play back a track while the
recorder is stopped
1 Turn AMS (or press or ►►!) until the number of
the track you want to play appears.
2 Press AMS or O.
When you listen with headphones
Connect the headphones to the PHONES jack. You can
adjust the volume with the LEVEL, control.
Disc name
S O N G S
Music calendar
J.
0
Total number of tracks Total disc playing time
1 5 T r 6 8 m 0 7 s
12