Creating your own program (program play), Note, If you've made a mistake – Sony MDS-302 User Manual

Page 16: To cancel program play, Q' you can program the same track repeatedly, Playing mds

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Playing MDs

Creating Your Own Program
(Program Play)

You can specify the playback order of the tracks on an

MD and create your own programs containing up to 25
tracks.

'Q'

The program remains even after Program Play ends

When you press 1>, you can play the same program

again

Note

The display shows "--------” instead t)f the total playing time

when the ti>tal playing time of the program exceeds U)0

minutes.

PROGRAM

Number

buttons

CLEAR

1

Press PLAY MODE repeatedly (or I’ROGRAM once)

until "PROGRAM" appears in the display.

2

Do either a) or b):

a) When using the remote

Press the number buttons to enter the tracks you

want to program in the order v'ou want.

To program a track with a number over 23, use

the >25 button (see page 14).

If you've made a mistake

I’ress CLEAR, then press the right number button.

b) When using the controls on the recorder

1

Turn AMS until the track number you want

appears in the display.

2

Press AMS or PLAY MODE.

Checking the track order

You can check the order of tracks in your program
during playback or playback pause.

Turn AMS (or press K4 or ►►!) during playback or

playback pause. The track numbers appear in the order

they were programmed.

Changing the track order

You can change the order of the tracks in your program
before you start playing.

To

Do the following:

Hra.se the last track in the
program

Press CLEAR. Each time you
press the button, the last track
will be cleared.

Add tracks to the end of the
program

Do the procedure on this
page starting from Step 2

Change the whole
firogram comp)letely

1

Press ■ (stop) w'hile the

recorder is stopped.

2

Do the procedure on this

page starting from Step 2.

3

Repeat Step 2 to enter other tracks. Each time you

enter a track, the total program time is added up

and appears in the display.

4

Press O to start Program Play.

To cancel Program Play

Press PLAY MODE repeatedly

[ o r

CONTIN'UE once) until

"PROGRAM" disappears.

'Q' You can program the same track repeatedly

While the track number appears in the display, press AMS

as many times as you want.

16

Advertising