Sony MDS-302 - Manual (Page 24)

Editing RecordedMDs
2 Select the character type as follows:
To select
.(uvercase letters
Numbers
Press
CATS repeatedly until "Selected
abc" appears in the display
Uppercase letters CAPS repeatedly until "Selected
.ABC" appears in the display
NLiM repeatedly until "Selected
12.1" appears in the display
3 Enter one character at a time.
After you enter a character, the cursor shifts
rightward and waits for the input of the next
character.
Erasing all titles on a disc (Name Erase
Function)
Use this tiinction to erase alt titles on an VID
simultaneously.
Note that once erased, titles cannot be recovered.
1 Keep pressing EDIT/NO while the recorder is
stopped until "All Erase ?" appears in the display.
2 Press EDIT/.NO again. "Name Erase i”" appears in
the display.
3 Press YES.
All titles are erased.
4 Repeat Steps 2 and 3 until ycm have entered the
entire title.
To cancel the Name Erase Function
Press ■.
If you entered the wrong character
Press or ►► until the character to be corrected starts
flashing.
Press CLEAR to erase the incorrect character, then enter
the correct one.
'Q' You can erase all recorded tracks and titles
See "Erasing all tracks on an ,V1D" on page 19.
5 Press NAME again.
The entered title appears on the left side of the
display window after the label has been recorded.
To cancel labeling
Press ■.
Changing an existing title
1 Press NAME, then do the following:
To change Make sure that the recorder is
A track title Playing or pausing the track
whose title is to be changed
A disc name Stopped
2 Keep pressing CLEAR (or EDIT /NO on the
recorder) until the current title is erased.
3 Enter the new title.
Do Steps 3 to 5 of "Labeling Recordings" on page 23,
or Steps 2 to 4 of "Labeling tracks and MDs with the
remote" on this page.
4 Press NAME.
24