Basics, Making calls, Additional tasks – Sony SPP-M502 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basics
Making calls
Additional tasks
1
2
Pick up the handset from the
base phone.
3
4
Press
(LINE 1
) or
(LINE 2) tO
select the line.
The corresponding line button
lights up.
You will then hear a dial tone. If
you hear an error beep, move
closer to the base phone.
Dial the phone number.
When you are done talking,
press (
OFF
) or replace the
handset on the base phone.
The LINE 1 or LINE 2 button
goes off.
To
Do this
Put a call on hold
Press (
HOLD
)■
The LINE 1 or LINE 2 button will flash slowly.
Press
C LINE 1
) or
C LINE 2
) to resume the conversation.
Improve reception
Press
(CHANNEL)* *.
Adjust the handset volume
Slide the VOL control.
Switch to tone dialing temporarily Press
(»TONE)
after you are connected. The line will
remain in tone dialing until disconnected.
• If you hear fiv'e short error beeps when you press (CHANNEL), move closer to
the base phone.
Notes
• Before dialing, make sure you can hear the dial tone, otherwise you cannot
dial correctly.
• Do not press
(CHANNEL)
when you are far from the base phone. The call may
be disconnected.
14^^ I Basics