Mounting the base phone on a wall – Sony SPP-M502 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mounting the base phone on a wall
1
Telephone
line cord
Reverse the hang-up tab.
Plug the telephone line cord(s)
to the"L1/L1+L2" and/or"L2/
DATA" jack and the AC power
adaptor to the "DC IN 9V" jack.
Attach the wall bracket to the
center of the base phone.
Align the A marks of the wall
bracket with those of the base
phone.
Plug the telephone line cord(s)
to the telephone outlet(s), and
hook the base phone to the wall
plate.
Plug the AC power adaptor to
an AC outlet. Then fully extend
the antenna so that it points
towards the ceiling.
Wall
bracket S
Wall plate
AC outlet
Telephone
line cord
AC power adaptor
>
a
Q.
5
'
3
SL
3
-4i
0
-T
3
r*
5
'
3
Tip
To remove the wall bracket, press the lower tabs.
Additional Information 33‘"