Resetting the digital security code, Note, Tips – Sony SPP-M502 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Additional Information
Resetting the digital security code
You normally do not need to set the digital security code. It is assigned
to your base unit and handset automatically when you charge the
battery pack for the first time (see page 12).
However, in the \ erv unlikely event that you suspect another cordless
telephone using the same security code, you can change the code.
1
2
Place the handset on the base
phone.
Press (
INTERCOM) of the
base
phone.
Pick up the handset for more
than one second. Then replace
the handset on the base phone
and keep it as it is for more than
three seconds to complete
changing the code.
Note
When the battery pack in the handset is completely discharged, or is removed
from the handset, the digital security code will be erased.
In this case, charge the battery pack. A new digital security code will be
assigned automatically.
Tips
• This procedure changes the security code in both the base phone and the
handset.
• You can change the security code as often as desired.
32^" I
Additional Information