Notes, Tips, Choosing the dialing mode – Sony SPP-205 User Manual
Page 10: If you are not sure of your dialing system, Step 2; setting up the base phone (continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2; Setting up the base phone (continued)
Notes
• Use only the supplied AC-T48 AC power adaptor.
Do not use any other AC power adaptor.
• Connect the AC power adaptor to a continuous power supply.
• Place the base phone close to the AC outlet so that you can easily
unplug the AC power adaptor.
Tips
• If your telephone outlet is not modular, contact your telephone service
company for assistance.
• To remove the wall bracket, press the upper tab.
Polarity of the plug
Modular
Choosing the dialing mode
For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
Depending on your dialing system, set the DIAL MODE switch as
follows:
If your dialing system is
Set the switch to
Tone
TONE
Pulse
PULSE
If you are not sure of your dialing system
Make a trial call with the DIAL MODE switch set to TONE.
If the call connects, leave the switch as it is; otherwise, set to PULSE.
1CK"
Getting Started