Switching the phones during a call, To switch from the base phone to the handset, Note – Sony SPP-205 User Manual
Page 19: Continued
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Switching the phones during a call
When you put on a call on hold, you can return to the call on the other
phone without disconnecting the call.
To switch from the base phone to the
handset
1
Press
(
HOLD) on the base phone.
The LINE lamp and the TALK/
ВАТТ LOW lamp on the handset
will flash slowly.
Press
(TALK)
or pick
up
the
handset from the base phone.
The LINE lamp and the TALK/
ВАТТ LOW lamp on the handset
will light up.
When you are done talking, press
(OFF)
or replace the handset to
the base phone.
a
<
Ш
3
n
a
a
T
(Б
&l
ft
1
Л
Note
If you do not press (HOLD ) in step I, the cal! will not be switched to another
phone and the conversation will be continued between the base phone, handset
and outside caller.
continued
Advanced Features
19'