Mounting the base phone on a wall – Sony SPP-205 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Mounting the base phone on a wall
1
2
-Telephone
line cord
4
5
Reverse the hang-up tab.
Plug the telephone line cord to
the LINE jack and the AC power
adaptor to the IXl IN 9V jack.
Attach the wall bracket to the
center of the base phone.
Align the A marks of the wall
bracket with those of the base
phone.
Plug the telephone line cord to
the telephone outlet, and hook
the base phone to the wall plate.
Plug the AC power adaptor to
an AC outlet. Then fully extend
the antenna so that it points
towards the ceiling.
Tip
To remove the wall bracket, press the lower tabs.
26“
I
Additional Information
Advertising