Storing phone numbers on the base phone, To store the previous number dialed, Continued – Sony SPP-205 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
storing phone numbers on the base phone
1
2
Press
(SPEED DIAL/PGM).
The LINE lamp flashes quickly.
Press one of the dialing keys ((o)
to (D) for the phone number to
be stored.
You will hear a confirmation
beep.
3
Enter the phone number you
want to store.
You can enter up to 16 digits,
including a tone and a pause,
each of which is counted as one
digit.
4
Press
(SPEED DIAtyPGM).
You will hear a long confirmation
beep, and the number is stored.
The LINE lamp goes off.
Notes
• Do not allow more than 20 seconds to elapse between each step of the procedure.
• You cannot store phone numbers on the base phone while the handset is
being used. The LINE lamp will light up to indicate this condition.
Tips
>
Q.
<
3
n
a
n
(D
D
r*
C
"1
n
If you enter a wrong number, press (
speed
pfAUPGM
). then start from the
beginning.
Use the supplied directory to write down what you have stored on the speed dialing
numbers.
To store the previous number dialed
Press (
REDIAUPAUSE
) directly after step 2, then go to step 4.
continued
Advanced Features
17'^