Sony DHC-MD333 - Manual (Page 12)

Playing a CD (continued)
Tips
• You can Start playing from the desired track in
step 2.
1 Press MD/CD or ►►►►< repeatedly
until you find the desired track.
2 Press CDOOD.
• Pressing CD OOO (or CD C>- on the remote) when
the power is off automatically turns the power on
and starts CD play if there is a CD on the disc tray
(One Touch Play).
• If you turn the power on when there is a CD on
the disc tray, the CD indicator is lit red,
• You can switch from another source to the CD
player and start playing a CD by pressing CD
OOO (or CD О on the remote) (Automatic
Source Selection).
• If there is no CD in the player, "CD NO DISC"
appears in the display.
Notes
• Do not use a CD with tape, seal or paste on it as
this may damage the CD player.
• Do not push the disc tray closed, as this may
damage the unit. Press CD ^ to close the disc tray.
Recording a CD on
an MD
— CO-MD Synchro Recording
You can make a digital recording of a CD on
an MD, marking track numbers in the same
sequence as the original CD. If you use a
recorded MD, the MD deck automatically
locates the end of the recorded porhon and
starts recording from there. You can also
record a programme of favorite tracks (see
page 29).
To turn on the system, press I / C!).
MD
indicator
1
Insert a recordable MD.
With the
label side up
and the
shutter slide
rightward.
12