Sony DHC-MD333 - Manual (Page 23)

Press EDIT and press +/-
repeatedly until "Name in ?"
appears.
Name in ?
3
Press ENTER/YES.
The cursor flashes.
Cursor
Press CHARACTER repeatedly
until the type of character you want
appears.
Each time you press the button, the
display changes as follows:
A (Upper case) —♦ a (Lower case) —*• 0
(Numbers) —+ ! (Symbols)"^
—►
i_j (Space)** — ► A. ..
* You can use the following symbols.
** To ent3r a space
Go to the step 6. You cannot label a
blank space for the first letter.
5
Press +/- repeatedly until the
desired character appears.
6 Press CURSOR
The character you selected in step 5 stops
flashing and the cursor shifts to the right.
7
Repeat steps 4 through 6 to
complete the entire title.
If you enter an incorrect character,
press CURSOR ■4“ or ^ until the
character you want to change flashes,
then repeat steps 4 through 6.
To erase a character, press
CANCEL/NO while the character is
flashing. You cannot ir\sert characters
between previously inserted characters.
8
Press ENTER/YES to complete the
labelling procedure.
The title is memorized into the unit and
then the original display app>ears.
To cancel labelling
Press EDIT.
Note
Turn on the system power at least once a month,
otherwise the titles arc erased from the memon.’.
To check the titles
Press DISPLAY while playback is stopped.
Each time you press the button, the display
changes as follows:
The disc title
I
The total number of tracks and the total
playing time
To erase a disc title
1 Press EDIT then press +/ - repeatedly until
"Name Erase ?" appears.
2 Press ENTER/YES.
The disc title flashes.
"No Name" appears if no disc title is
stored.
3 Press +/- repeatedly until the disc title you
want to erase disappears.
4 Press ENTER/YES again.
"Complete" appears and the disc title is
erased.
To cancel erasing
Press CANCEL/NO.
3*
fD
n
o
ft)
23