Sony DHC-MD333 - Manual (Page 16)

Listening to the radio (continued)
Press TUNER/BAND {or BAND on
the remote) repeatedly until the
band you want appears.
Each time you press the button, the band
changes as follows:
North American model:
FM— AM
t____I
European model:
FM-* MW -► LW
t________ I
Other models:
FM — MW — SW
FM 87.5MHz
2
Press TUNING MODE repeatedly
until "PRESET" appears.
FM 87.5MH:
3
Press TUNING + or - (or PRESET
+ or - on the remote) to select the
desired station's preset number.
Turn off the
radio
Adjust the
volume
To Do this
Press I / c!) to turn off the
system.
Turn VOLUME (or press
VOL + /- on the remote).
To listen to non-preset radio
stations
• Press TUNING MODE repeatedly until
"MANUAL" appears in step 2, then press
TUNING + or - to tune in the desired
station (Manual Tuning).
• Press TUNING MODE repeatedly until
"AUTO" appears in step 2, then press
TUNING + or The frequency indication
changes and scanning stops when the
system tunes in a station (Automatic
Tuning).
To cancel the Automatic Tuning
Press TUNER/BAND.
Tips
• Pressing TUNER/BAND (or BAND on the
remote) when the power is off automatically turns
the power on and tunes in the last received station
(One Touch Play).
• You can sw’itch from another source to the tuner
by pressing TUNER/BAND (or BAND on the
remote) (Automatic Source Selection).
• To improve broadcast reception, reorient the
Supplied aerials or connect the optional external
aerial.
• When an FM programme has static noise,
press STEREO/ MONO until "MONO" appears.
There will be no stereo effect, but the reception
will improve. Press the button again to restore the
stereo effect.
FM 87.5MHz, ,1
Frequency or the station The
name* or RDS station preset
name** number
* If you label a preset station, it appears
in the display.
** European model only.
16