Note, Connecting an antenna/cable tv system to a vcr – Sony KP-61XBR300 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting an Antenna/Cable
TV System to a VCR
1
,'\tlacli the coaxial cable from the incoming
cable connection or antenna to IN on the \’CR.
2
Using a coaxial cable, connect OUT on the
VCR to VHF/UHF on the projection TV.
3
Using AUDIO and S VIDEO* cables, connect
AUDIO and S VIDEO OUT on the VCR to
AUDIO and S VIDEO IN on the projection TV
(White-AUDIO Left. Red-AUDIO Right).
* If your VCR is not equipped with S VIDEO, use
a VIDEO cable (yellow) instead of the S VIDEO
cable.
Note:
• If you are connecting a monaural VCR, connect
only the single audio output to the left (MONO)
input on the projection TV.
Disconnect all power sources before making any connections.
(Rear of projection TV)
S VIDEO
Cable/
Antenna
3
(0
3
<Q
Hi
3
Q.
O
o
3
3
<D
0
1
I
<D
o
o‘
a