About the control s in/out, Jacks, Making connections – Sony KP-61XBR300 User Manual
Page 9: Cable or antenna, Cable and antenna, Connecting directly to a cable or an antenna
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
About the CONTROL S IN/OUT
jacks
To L'onlrol otlicr Sony oquipiiK'iU \\ itli llic
projection TV's rcinotc control, connect the
CONTROL S IN jack of the equipment to the
CONTROL S OUT jack on the projection TV with
the CONTROL S cable.
To control the projection TV with a retiiotc control
for another Sony product, connect the CONTROL
S OUT jack of the equipment to the CONTROL S
IN jack on the projection TV with the CONTROL
S cable.
Making Connections
Connecting Directly to a Cable
or an Antenna
The connection you choose will depend on the
cable found in your home. Newer homes will be
equipped with standard coaxial cable (see
A);
older homes will probably have 3(K)-ohm twin lead
cable (see
B);
still other homes may contain both
(see
C).
VHFonly
or
VHF/UHF
or
Cable
75-ohm
coaxial cable
(Rear of
projection TV)
VHF/UHF
B
300-ohm twin
lead cable
(Rear
ofprojection TV)
VHF/UHF
75-ohm coaxial cable
and
(Rear of
projection
TV)
UHF
EAC-66 U/V mixer
(not supplied)
300-ohm twin lead cable
Cable or antenna
This is the simplest connection. Connection is
made directly from the cable or antenna to the
projection TV.
Cable
(Rear of projection TV)
VHF/UHF
Cable and antenna
You may find it convenient to use the following set
up if your cable provider does not feature local
channels that you are able to receive using an
antenna.
CATV cable
(Rear of
projection TV)
AUX
Antenna cable
VHF/UHF
dE
Select Cable or ANT mode by pressing ANT on
the remote control.
:s
(A
:3
(Q
fit
:3
a
o
o
:3
3
(b
o
3
<D
<D*
O
O’
3
(continued)
g