Sony KP-61XBR300 - Manual (Page 37)

NR
—
Picture Noise Reduction
Sclccl ON to reduce picture noise.
Select OFF to cancel the I'eature.
NR can be set separately I'roin the MODI: settings
of the VIDEO menu.
DYNAMIC PICTURE
—
Black Intensity Adjustment
Select ON to etnphasize the black level and to
produce a bolder dynamic picture.
Select OFF to cancel the feature.
To restore the factory settings
Press RESET on the remote control while the
VIDEO menu is selected. To restore each MODE
to the factory setting, press RESET after selecting
the mode to be reset.
NR is not reset to the factory setting even if you
press RESET.
Using the AUDIO
Menu
Sliders
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page .^1.
To select the AUDIO J> menu:
Display Highlight Jl ^ Select
MENU
TREBLE
,— Sound Adjustment
Adjust slider right (up) to increase high pitched
sounds.
Adjust slider left (down) to decrea.se high pitched
sounds.
BASS
— Sound Adjustment
.Vdjust slider right (up) to increase low pitched
sounds.
Adjust slider left (dow n) to decrease low pitched
sounds.
BALANCE./ .. ........
— Sound Adjustment ; . ■
Adjust slider right (up) to emphasize right speaker
volume.
Adjust slider left (down) to emphasize left speaker
volume.
MTS
— Enjoy stereo, bilingual and mono ‘ -
programs
STEREO;
Select for stereo reception when viewing a
program broadcast in stereo.
SAP:
Select to listen to a bilingual broadcast. (non-SAP
programs will be muted when this feature is
selected)
MONO:
Select for mono reception, (use to reduce noise
during stereo broadcasts)
Quick MTS access:
Press MTS on your remote control to cycle through
the MTS options as follows: (STEREO ♦ SAP ♦
MONO ♦ STEREO)
(continued)
C
<o
c
CO
rn
•H
c
3
c
33