Rear of projection tv) – Sony KP-61XBR300 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting an Amplifier That
Supports Dolby Pro Logic
Decoder
It'you uso an amplifier with a Dolby Pro l.ogic
decoder instead of the projection TV's audio
system, you can still use the projection TV's center
speaker.
1
Using the speaker cords (supplied with the
amplifier), connect the speaker terminals on
the amplifier to CENTER SPEAKER IN +/-
on the projection TV.
2
Using an AUDIO cable, connect AUDIO (FIX)
OUT on the projection TV to one of the unused
Line inputs (e.g. Tape-2, AUXI. etc.) on the
amplifier (White-AUDIO Left. red-AUDIO
Right).
3
Set the amplifier to the chosen Line input and
u.se the AUDIO menu to set "SPEAKER” to
"CENTER IN” on the projection TV. (see
"SPEAKER” on page .34)
Disconnect all power sources before making any connections.
(Rear of projection TV)
3
w
<Q
Bi
3
Q.
s>
3
3
o
3
‘
3
<b
o
o’
3
19