Unpacking, Inserting batteries into the remote, Notes – Sony STR-DA80ES User Manual
Page 4: Hookup overview, Before you get started
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Unpacking
Check that you received the following items with the
receiver:
• FM wire antenna (1)
• AM loop anteima (1)
• Remote commander RM-P50I (remote) (I)
• Size AA (R6) batteries (2)
Inserting batteries into the remote
Insert two size AA (R6) batteries with the + and - on
the battery compartment. When using the remote,
point it at the remote sensor ■ on the receiver.
When td replace batteries
Under normal use, the batteries should last for about 6
mondis. When the remote no longer operates the
receiver, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct suntight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don't use die remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Hookup Overview
The receiver allows you to coimect and control the
following audio/ video components. Follow the
hookup procedures for the components that you want
to cormecl to d\e receiver on the pages specified. To
learn the locations and names of each jacks, see "Rear
Panel Descriptioirs" on page 35.
Speaker
System
Hookups
(7)___
TV/VCR Hookups (9)
Digital Component
Hookups (10)
Antenna Hookups (5)
DVD player
Front
speaker
(U
TV
VCR
LD player
AM/FM antenna
T
O
-
O O Т Т B ATo(*|^o"i^
5 • •
~
T
... T f f
u
1 '~r
Rear
speaker
(L)
Video camera
recorder
Center
speaker
CD player
Video game
Tape deck
Rear
speaker
(R)
DAT/MD deck
Turntable
Audio Component
Hookups (6)
Before you get started
• Turn off the power to all components before making
any connections.
• Do not connect the AC power cords until all of the
connections are completed.
• Be sure to make connections'firmly to avoid hum
and noise.
• When connecting an audio/srideo cable, be sure to
match the color-coded pins to the appropriate jacks
on the components; Yellow (video) to Yellow; White
(left, audio) to White; and Red (right, audio) to Red.