To connect the speaker cords, V if you lisve an additional front speaker system, Tf you have an'active woofer – Sony STR-DA80ES User Manual

Page 8: Note, Speaker placement, Y rp®iish

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Getting Started

To connect the speaker cords

Rear and center speakers

Rear speaker

(R) Center speaker Receiver

Rear speaker

(L)

eo

y rp®IISh

eo

V If you lisve an additional front speaker system

Connect them to the FRONT SPEAKERS B terminals.

eliie

^ tf you have an'active woofer

Connect the active woofer to a PRE OUT WOOFER jack.

Note '

If you use front speakers with low maximum power input,
adjust the volume carefully to avoid excessive output on the
speakers.

Speaker placement

For the best possible surround sound, we recommend:

• The best quality speakers possible
• Front, center, and rear speakers of equivalent size

and quality

• Positioning of speakers at the same distance from the

listening position (O).

The center speaker, however, may be moved closer, but

not beyond the straight line connecting the two front
speakers (©). The rear speakers may also be closer to
listening position than the front speakers (©), to suit

the configuration of your room. If the surround effect
is still inadequate, adjust the CENTER DELAY and

REAR DELAY parameters (see page 21).

Notes

• Do not place the center or rear speakers farther away from

the listening position than the front speakers.

• When mounting the rear speakers on side walls

perpendicular to the listening position they should be
placed 60 - 90 cm above the listening position.

Depending on the shape of your room (etc.), you may

wish to place the rear speakers behind you instead of
on the side walls. One advantage of this placement is

that you can use a pair of large floor standing speakers
matching your front speakers.

Note

If you place the rear speakers behind you, be sure to
check the speaker location setting in the SPEAKER

SETUP menu when using VIRTUAL MULTI REAR

and VIRTUAL REAR SHIFT sound fields (see page 23
for details).

Advertising