Sony KV-36XBR400 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the TV
Cable and Antenna
If your cable provider does not feature local channels, you may find
this set up convenient.
CATV cable
AUX
(No connection to
TO CONVERTER)
Antenna cable
Rear of TV
TO CONVERTER
VHF/UHF
Select CABLE or antenna (ANT) mode by pressing ANT on the remote
control.
^ In order to receive channels with an antenna, you need to turn your Cable to OFF and
perform the Auto Program function (see page 30).
Cable Box
Connections
Some pay cable TV systems use scrambled or encoded signals that
require a cable box to view all channels.
Cable Box
1 Connect the coaxial connector from your cable service to the
cable box's IN jack.
2 Using a coaxial cable, connect the cable box's OUT jack to the
TV's VHF/UHF jack.
Cable
VHF/UHF
Rear of TV
IN
OUT
Cable box
^ If you will be controlling all channel selection through your cable box, you should
consider using the Channel Fix feature (see page 30).