Connecting a satellite receiver with a vcr – Sony KV-36XBR400 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1 Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2 Connect the CATV cable to the VCR's VHP / UHF IN jack.
3 Using a coaxial Ccible, connect the VCR's OUT jack to the TV's
VHP/UHF jack.
4 Using an A/V cable, connect the satellite receiver's A/V OUT
jacks to the VCR's A/V IN jacks.
5 Using an A/V cable, connect the VCR's A/V OUT jacks to the
TV's A/V IN jacks.
Installing the TV
Connecting a Satellite Receiver with a VCR
13
Advertising
This manual is related to the following products: