Using the remote control, Inserting batteries, Remote control overview – Sony KV-36XBR400 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Introducing the FD Trinitron Wega
Using the Remote Control
Inserting Batteries
Insert two size AA (R6) batteries (supplied) by matching the + and
on the batteries to the diagram inside the battery compartment.
^ Remove the batteries to avoid damage from possible battery leakage whenever you
anticipate that the remote control will not be used for an extended period.
Handle the remote control with care. Avoid dropping it, getting it wet, or placing it in
direct sunlight, near a heater, or where the humidity is high.
Remote Control
Overview
Here's an overview of the buttons on the remote control you will
probably use most often. For a complete description of the remote
control, see "Using the Remote Control" on page 40.
To Do This...
Use This Button
Turn the TV
on and off
TV (POWER)
Select channels
0-9 and ENTER
directly
Press 0 - 9 to select a channel, the channel changes
after 2 seconds. Press
ENTER
for immediate selection.
Scan through
channels
CH +/-
ES To scan rapidly through the channels, press and hold down
the CH+ or CH- button.
Adjust the volume
VOL
+1-
Switch video inputs
(such as a VCR)
TV/VIDEO
Press repeatedly to toggle through all video inputs.
Display the Menu to MENU
make changes to the p^j. details, see "Using the Menus" on page 25.
TV
View the Favorite
Channels list
FAVORITES
For details, see "Using Favorite Channels" on
page 20.
Using the on-screen
functions
©
Move
Select