Connecting a vcr and cable – Sony KV-36XBR400 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Connecting a VCR and Cable
1 Connect the cable TV cable to the VCR's IN jack.
Using a coaxial cable, connect the VCR's OUT jack to the TV's
VHF/UHF jack.
Installing the TV
2
3
Using an A/V cable, connect the VCR's A/V OUT jacks to the
TV's A/V IN jacks.
^ If your VCR has an S VIDEO jack: For best picture quality, use an S VIDEO connection
instead of the yellow video cable on your combined AA/ cable. Using an S VIDEO cable,
connect the VCR's S VIDEO OUT jack to the TV's S VIDEO IN jack. S VIDEO does not
provide audio, so audio cables must still be connected to provide sound.
TV
1
Cable
Advertising
This manual is related to the following products: