Connecting a satellite receiver – Sony KV-36XBR400 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the TV
Connecting a Satellite Receiver
1 Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2
Using an A/V cable, connect the satellite receiver's A/V OUT
jacks to the TV's A/V IN jacks.
3
Connect a coaxial cable from your cable or antenna to the TV's
VHF/UHF jack.
1^
If your satellite receiver has an S VIDEO jack; For best picture quality, use an S VIDEO
connection instead of the yellow video cable on your combined A/V cable. Using an S
VIDEO cable, connect the satellite receiver's VIDEO OUT jack to the TV's S VIDEO IN
jack. S VIDEO does not provide audio, so audio cables must still be connected to provide
sound.
TV
12