Locating a specific track, To pause playing at the beginning of a track, To go quickly to the beginning of the last track – Sony MDS-S35 User Manual
Page 13: Locating a particular point in a track, Notes, Playing mds
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing MDs
Locating a Specific Track
You can quickK' locato am track while plavinj; a disc
b\' using AMS (.Automatic Music Sensc'r), and
number butti)ns or M.SCAN on the remote.
To locate
Do the following:
The next or
succeeding tracks
Turn AMS clockwise or press
repeatedly until you find the track
The current <_)r
preceding tracks
l urn AMS counterckickwise or press
repeatedly until you find the
track
A specific track
directly' "i i
Press number buttonsgo enter the
track number
By scanning each
track for 6 seconds
(music scan)
I .
1 Press M.SCAN before you start
playing. *
2 When you find the track you want,
press ► to start playing.
To pause playing at the beginning of a track
Turn AMS (or press or ►►!) after pausing playback.
To go quickly to the beginning of the last track
Turn AMS counterclockwise (or press ) while the display
shows the total track number and total disc playing time (page
12
) .
Locating a Particular Point in a
Track
^'ou Ccin also use MM and ►► to locate a particular
point in a track while plavin^^ an MD or during
playback pause.
While monitoring the
stHind
►► (forward) or M^ (backward)
and keep pressing until voii find
the pciint
Quickly by observing
the display during
playback pause
►► or MM and keep pressing until
you find the point. There is no
sound output during this
operation.
'Q' If "OVER" appears in the display while you are
pressing ►► during playback pause
The disc has reached the end. Press MM (tfr ) or turn
AMS counterclocku’ise to go hack.
Notes
• It the disc reaches the end while you are pressing ►► during
sound monitoring, the deck stops.
• Tracks that are only a few seconds long may be too short to
scan using the search function. For such tracks, it is better to
play the MD at normal speed.
'Q* When you directly locate a track with a number over 25
You must press >25 first, before entering the
corresponding digits.
Press >25 once it it is a 2-digit track number, and twice it it
is a 3-digit track number.
To enter
"0/'
press button ]().
Rxamples: • To play track number 30
Press >25 once, then 3 and 10.
• To play track number 100
Press >25 twice, then 1, 10 and 10.
'Q' You can extend the playing time during music scan
While thk“ deck is stopped, press .M.SCAN repeatedly until
the playing time you want (6, 10 or 20 seconds) appears in
the displny, Fach press changes the time in order ol 0 to
20, then from ft again.
13