Sony MDS-S35 - Manual (Page 17)

Editing Recorded MDs
Notes on Editing
If "Protected" appears in the display
I lu' deck i.4>uld not СГ.Ы' tho ^poi.'iticd track because the rectn'd-
protect sK>t on the Ml) open, h.rase the track after closin^^ the
slot.
When "TOC" flashes in the display
Do not nio\ e the deck t>r pull i>ut the mains lead. After editilpц,
'' ГОС' iiphts c4>ntinuouslv until YOU eject the MD tir turn oti
the p(.n\ er. ''TOC" flashes while the deck is updatiiv^ the 'IXX'.
When the deck finishes updating the 'ГОС, "TOC'goes off.
Erasing Recordings (Erase
Function)
Do tlio procedures belou to erase following:
• A single track
• All tracks
• Parts of a track
Note, however, that once erased, MD data cannot
be recovered.
Erasing a single track
You can erase a track simply by specifying the
respective track number. When vou erase a track, the
total number of tracks on the MD decreases by one and
all tracks following the erased one are renumbered.
Since erasing merelv updates the TOC, there is no need
to record over material.
I() avoid contusiini when erasing multiple tracks, you
should proceed in order of high to low track number to
prevent the renumbering of tracks that have not been
erased \'et.
Example: Erasing В
Track _
number
Erasing
1 2 3 4
A В C D
t
---^
2
В is erased ,
/ 3
D
1 Turn AMS until the track number vou want to erase
appears in the displav.
2 Press PDIT/NO repealedlv until ''Prase ?" appears
in the displav.
The track number vou selected starts flashing in the
music calendar.
3 Press YPS.
When the track selected in Step I has been erased,
"Complete" apapears for a tew seconds and the total
number of tracks in the musie calendar decreases bv
one.
If vou erase a track ciuring pilavback, the track
following the deleted track begins palaying
afterwards.
4 Repeat Stepas 1 to 3 to erase more tracks.
To cancel the Erase Function
Press EDIT/N'O, ■, or turn AMS to change the track number.
Note
If "Prase!! ?"appeais in the display, the track was recorded or
edited on another MD deck and is record-parotected. If this
indication apapears, paress YES to erase the track.
Erasing all tracks on an MD
Erasing a recordable MD deletes the disc name, all
reexarded tracks and titles (see page 22).
1 While the eteck is stopped, press EDIT/NO
repaeatedly until "All Erase ?" appears in the display.
2 Press YES.
All tracks in the music calendar start flashing.
3 Press YES again.
When the disc name, all recorded tracks and titles
on the MD have been erased, "Complete" appears
for a few seconds anci the music calendar
disappears.
To cancel the Erase Function
I’ress HDlT/NOor ■.
17