Creating your own program (program play), If you've made a mistake, To cancel programme play – Sony MDS-S35 User Manual
Page 15: You cdn program the same track repeatedly, The program remains even after program play ends, Note, Checking the track order, Changing the track order, Creating your own programme (programme play), Playing mds
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing MDs
Creating Your Own Program
(Program Play)
You can spociiv tlio playback order of tire tracks oir an
MDand create voiir own programs containing up to 2a
tracks.
MO ■
t
J TiwJ “
hi
LM
j o
IKM M
>
J\S >{>fl
PLAY MODE
>25
PROGRAM
Number
buttons
CLEAR
1
Press PLAY MODE repeatedly (or PROGRAM once)
until "PROGRAM" appears in the display.
2
Do either a) or b):
a) When using the remote
Press the number buttons to enter the tracks you
want to program in the order you'want.
To program a track with a number over 25, use
the >25 button (see page 13).
If you've made a mistake
Press Cl .PAR, then press the right number button.
b) When using the controls tm the deck
1
Turn AMS until the track number you want
appears in the display.
2
Press AMS or PLAY MODE.
3
Repeat Step 2 to enter other tracks. Each time you
enter a track, the total prcigram time is added up
and appears m the display.
4
Press >I1D (or ►) to start Program Play.
To cancel Programme Play
Pre.ssPLAY MODE repeatedly (or CONTINUE once) until
" I ’ROC i R A M " d isa ppea rs.
You cdn program the same track repeatedly
While the trai k number appears in the display, press A.VIS
as many tinu> as \'ou vwint.
The program remains even after Program Play ends
When \'ou press MB (or ►). \'ou can pla\' the same
¡rrograin again
Note
• the dispLn' shows "------ " instead ol the total pkwing time
wlien the total pkwing timeol the program e\ceeds 100
minutes.
• the program created b\' the I’rogram Play Eunction is lost
when
\'OLi
turn
ott
the deck
or
disamnect the At pt>wt'r
cord. The program is, howev er, ivcalled during timer
pkwback.
Checking the track order
can chock the ttrdor ot tracks in your program
during playback or playback pause.
Turn AMS (or press l-<^ or ►►!) cturing play back or
pilav'back pause. The track numbers appear in the order
the\' were programmed.
Changing the track order
You can change the order of the tracks in your
program before you start playing.
To
Do the following:
Erase the last track in the
program
Press CLEAR. Each time vou
press the button, the last track
will be cleared.
Add tracks to the end of the
program
Do the procedure on this
page starting fnnrr Step 2
Cliange tire u’hole
program completely
1 Press ■ while the deck is
‘'topped.
2 Do the procedure on this
page starting frcim Step 2.
15