Sony MDS-S35 - Manual (Page 6)

Recording on MDs
Recording on an MD
lu'toro \ (HI begin, make sure \ ou ha\ e een reeth' and
tiniiK' eonneeted the deek to an audio component such
as an amplitier or Cdi) plaver as indicated on page a.
Disc compartment
Set INl’LiT according to the input terminal
connected to tlie programme source.
1 Turn on the amplifier and the programme source,
and set the prt'gramme selector on the amplifier to
the programme source.
2 Press POVVFR to turn on the deck.
The ON/STANDBY indicator goes oft.
3 Insert the recordable MD with the label side up and
the arrow pointing toward the opening into the disc
compartment until the deck grips it.
If YOU insert the MD while the deck is off, the deck
will turn on automatically and "Welcome" will
appear in the display.
pointing this way
The total number of recorded tracks, total recorded
time, and music calendar without a grid appear in
the display.
DISC
,3 T r, ,1 8 m 3 6 s ,
1 2 3
i =
.
Total number of Total recorded Music calendar
recorded tracks time without a grid
When you want to record through Set INPUT to
LINE (ANALOU) IN ANALOG
Dlc;ri AL IN niCilTAL
5 Locate the position on the MD where you want to
start recording.
• l o record on a new (blank) recrrrdable MD, skip
this step, and go to Step h.
• To start recording from the end of the last
recorded traek, go to Step h, or turn AMS (or press
or ►►!) until "Hnd" appears.
• To record o\'er an existing track, turn AMS (or
press or ►►!) until the number of the track
to be recxrrded o\ er appears.
6
Press •.
The deck is now ready for recording.
• If you are recording from the end of the last
recorded track, or using a new recordable MD,
"New" alternates with the remaining time
indication in the display.
• If you are recording ov'er an existing track,
"TRACK" flashes and "Overwrite" alternates with
the remaining time indication in the display.
7 When you've set INPUT to ANALOG in Step 4, turn
REC LEVEL to adjust the recording level. (The
fourth dot is satisfactory for most purposes.
I low'ever, for a more precise adjustment, see
"Adjusting the Recording Level" on page 8.)
8 Press MD (or ►) to start recording.
9 Start playing the programme source you want to
record.
10 After finishing; press
■
to stop recording. Then
press = to remove tlie MD or press POWER to
cliange the deck to standby.
To Press
Pause* Mt (or I I )
Resume recording after pause >011 (or ► or I I )
Remove the Mf4
ZN
VVhumw’or yoe pause recording, the track number increases
bv one. h’or example, it vxni paused recording while
recording on track 4, the track nuniber increases by one and
rxvording continues on the new track when restarted.