Setting up the tv automatically, To perform auto set up again, Note – Sony KV-27V45 User Manual
Page 15: Using your new tv, O oqp ¿bq
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using your New TV
Setting up the TV automatically
The Easy Setup Guide allows you to set the
on-screen language and set all receivable
channels. The Easy Setup Guide screen
appears ev'ery time you turn on the TV until
you perform AUTO PROGRAM.
The Easy Setup Guide feature does not apply for
installations that use a cable box for all channel
selection.
To set up the TV manually, refer to "Using the
SET UP menu" on page 23.
Tips -'Q-
•
Perforin this function during the day, with the antenna -
and/or cable properly connected, to ensure that all available
channels wilt he broadcasting and receivable.
• After using the Easy Setup Guide you will still have the
option of adjusting any of the system settings, tike skipping
channels, tliivugh the SET UP menu (page 24).
• The TV imistjae set to theJV input to execute AUTO
PROGRAM. Press ANT until a channel number appears.
• If your cable or antenna is connected to AUX, then
press ANT until AUX appears next to the channel
number. (KV-27S6.S, 27V65 only)
Using the buttons on the front of the TV:
O OQP ¿BQ
For KV-27V65, the control buttons are located
on the top of the TV.
1
Press POWER to turn on the TV.
The Easy Setup Guide screen appears.
ENGLISH;
[CH+!
ESPQNOL
ÍCH-!
PUTO SET UP:
[U0L+]
demo
:
[UOL-]
First please
connect
cable/antenna•
Press (SETUPJto exit
2
(except Canadian models)
-Press CH -f to select English screens or
CH - to select Spanish screens.
3
Press VOL -r to continue or VOL - for a
DEMO of functions and menus.
fiUTO PROGRAM
AUTO PROGRAM appears and the TV
starts scanning and presetting channels
automatically. When all the receivable
channels are stored, the lowest numbered
channel is displayed. If the TV receives
cable TV channels, CABLE is set ON
automatically.
To perform AUTO SET UP again
• Press SET UP on the TV.
• Press CH + or CH - to select a language.
• Press VOL -P to restore factory settings
(CONTINUE TO AUTO PROGRAM? will
appear on the screen). Press CH -p to
continue or CH - to exit.
• Press SET UP to exit.
Note
• When you perform AUTO PROGRAM,
your CHANNEL FIX, CHANNEL BLOCK
and ON/OFF TIMER settings will be
erase'd.
13