Cable or antenna connections c, Connecting directly to cable or an antenna, Note – Sony KV-27V45 User Manual
Page 7: Cable and antenna, Cable or antenna connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cable or Antenna Connections c
Connecting directly to cable or an
antenna
The connection you choose will depend on the
cable found in your home. Newer homes will
be equippecf with standard coaxial cable
(see
A);
older homes will probably have
300-ohm twin lead cable (see B); still other
homes may contain both (see C).
B
only
VHF
or
VHF UHF
or
Cable
VHF only
or
UHF.only
or
V H F ' U H F
75-ohm
(Rear
of
TV)
coaxial cable VHF/UHF
300-ohm twin
lead cable
(Rear of TV)
VHF/UHF
Antenna connector
75-ohm coaxial cable
VHF
and
UHF
Note
• In order to receive channels with an
antenna, you will need tt) turn your CABLE
to OFF (see page 23) and perform the
AUTO PROGRAM function.
EAC-65 U/V mixer
(not supplied)
300-ohm twin lead cable
Cable and antenna
• KV-27S65, 27V65 only
If your cable provider does not feature local
channels, you may find this set up convenient.
Select Cable or ANT mode by pressing ANT
on the remote control. You will be able to
alternate between the two input sources.
CATV cable
(Rear of TV)
AUX
(No connection "TO
CONVERTER" in this case)
Antenna cable
TO CONVERTER
VHF/UHF