Connecting an antenna/cable tv system with a vcr, Connecting a vcr and tv with'a cable box, Vcr connections – Sony KV-27V45 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VCR Connections
Connecting an antenna/cable TV
system with a VCR
1
Attach the coaxial connector from your cable
or antenna to IN on your VCR.
2
Using A/V connectors, connect AUDIO and
VIDEO OUT on your VCR to AUDIO and
VIDEO IN on your TV (Yellow-VIDEO,
White-AUDIO Left, Red-AUDIO Right).*
3 Using a coaxial connector, connect OUT on
your VCR to VHF/UHF on your TV.
If vou are connecting a monaural VCI^, ctmnect only the
single white audio output to the left input on vour TV
Disconnect all power sources before making any connections.
Connecting a VCR and TV with'a
cable box
fou will need a splitter (not supplied) for the
ollowing connection.
1
Connect the single (input) jack of the splitter
to your incoming cable connection. Connect
the other two (output) jacks (using coaxial
cable) to IN on your cable box and VHF/UHF
on your TV.
2
Using a coaxial connector, connect OUT on
your cable box to IN on your V'CR.
J Using A/V connectors, connect AUDIO and
VIDEO OUT on vour VCR to AUDIO and
VIDEO IN on your TV (Yellow-VIDEO,
White-AUDIO Left, Red-AUDIO Right).