Sony KV-27V45 - Manual (Page 19)

Use the Yellow Labeled Buttons tor PIP Operations.
TV VTR Press to change the TV channel in the window picture. (KV-27S65, 27V65 only)
For models KV-27S45, 27V45, you must press VTR'DVD (FUNCTION), then use
CH
the main CH +'- buttons to change channels, (see right)
-o
POSITION Press to move the location of the window picture (counterclockwise) around the
0 main picture.
FREEZE
Press to freeze the window picture. Great for copying down phone numbers,
©
addresses, recipes, etc.
Press FREEZE again to restore the previous screen(s).
SWAP Press to switch the audio and video of the main picture and the window picture.
©
Each time you press S\i/AP, tbe picture and sound of the two will be swapped.
Any channels being received through the AUX jack cannot be displayed as a
window picture. (KV-27S65. 27V65 only)
Changing channels with a single
tuner
PIP
• KV-27S45, 27V45 only
1 Press TV'VIDEO until you reach the TV
input.
2 Press PIP (the window picture appears).
To change the window picture:
1 Press VTR/DVD (FUNCTION).
2 Press the main CH +/- buttons to change
channels.
To change the main picture:
1 Press TV (FUNCTION),
2 Press the main CFI +i- buttons to change
channels.
Note
• If you have the same program in both the
window and the main picture and cannot
change the channel in the window; press
TV/VIDEO until you reach the TV input in the
main picture.
17