Cable box connections, Cable box, Cable box and cable – Sony KV-27V45 User Manual
Page 8: Notes, Connecting and installing the tv (continuedy
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting and Installing the TV (continuedy
Cable Box Connections
Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to
v’iew all channels.
Cable box
1
Connect the coaxial connector from your
cable or antenna to the IN on your cable
box.
2
Using a coaxial cable, connect OUT on
your cable box to VHF/UHF on your TV.
If you will be controlling all channel selection
through your cable box, you should consider using
the CHANNEL FIX feature discussed on page 23.
Cable
IN
r-i
=CD——
*Cablc‘ ho:
Cable box and cable
• KV-27S65, 27V65 only
For this set up, you can switch between
scrambled channels (through your cable box),
and normal (CATV) channels by pressing
ANT on your remote control.
Notes
• Your Sony remt)te control can be
programmed to operate your cable box.
(see page 28)
• When using PIP, \'(iu cannot view the
window picture with the AUX input.
If you are connecting a cable box through the AUX input and would
like to switch between the AUX and normal (CATV) input you should
consider using the CHANNEL FIX feature discussed on page 23.
'^Cable box
scramblf: d
channels
(Real
01
TV)
AU
a
TO CONyLUitR
.'S olnr. fo,,Ki,=il
T (siqnal)
''fh'uu "'s'
vHf-. iiHt