Sony KV-27V45 - Manual (Page 31)

BM Troubleshooting
Consult the table below; it suggests solutions to specific problems. If you need more information, consult the operating instructions guide.
Cannot Operate Single Tuner PIP
(KV-27S45, 27V45) • VCR may not be connected to your TV properly.
• VCR may not be turned on. • Ensure that you have set your VCR correctly, (see page 7)
A red light keeps flashing on the
TV for more than a few seconds • Your TV may need service. • Call your local Sony service center.
TV makes a noise when turned
on
• This is a normal function of your TV.
Screen is not lit and there is no
sound • Power cord may not be plugged in.
• Batteries may not have been placed with the correct
polarity.
• TV/VIDEO setting may be incorrect.
• Press TV /VIDEO until you receive a channel.
• Perform AUTO SET UP again by pressing the SET UP
button on your TV. (see page 13)
Poor or no picture (screen lit),
good sound • VIDEO menu settings may not be adjusted correctly.
• Antenna/cable connections may be faulty.
• VIDEO LABEL inputs may be set to WEB. (This label
darkens the screen for ideal WebTV viewing.)
• Readjust your VIDEO menu settings.(see page 19)
• Check your VIDEO LABEL settings, (see page 25)
Good picture, no sound • Sound may be set to MUTE.
• Your TV may be set to SAP.
• Speaker may not be set correctly. • Check the MTS setting in the AUDIO menu, (see page 21)
• Check your SPEAKER settings, (see page 20)
No color • Color settings may not be adjusted correctly. • Adjust the COLOR settings in the VIDEO menu,
(see page 19)
29