Sony PCG-705 - Manual (Page 125)

1 Slide the power switch forward and hold it for more than four
seconds to turn off the computer.
2 Turn on the computer while holding down the F2 key. The BIOS
screen appears.
3 Press the Esc key. The Exit screen appears.
4 Select Get Default Value using the cursor keys and then press the
Enter key.
5 Press the Esc key, and then press the Enter key. The computer restarts
from the Recovery CD.
Using the Application Recovery CD
(Models PCG'705Q707C Only)
^ The following instrurtions are for models PCG-705C/707C only. If you have model
PCG-705E or 707E, see the instructions on page 120.
The Application Recovery CD allows you to reinstall individual
applications and device drivers if they are corrupted or accidentally
erased. Reinstalling an individual device driver or software title may
correct a problem you are experiencing with your computer, and you
may not need to recover the entire contents of your hard drive. If you do
need to reinstall all the software titles that shipped with your computer,
use the System Recovery CD. See “Using the System Recovery CD
(Models PCG-705C/707C Only)” on page 115.
^ You must be in Windows to run the Application Recovery CD. The appiicatbn wiit not run
frcm DOS. If you have any questions on using the Application Recovery CD, contact Sony
If your computer does not start from the Recovery CD
To use the Application Recovery CD
1 Turn on your computer. If your computer is already on, close all
applications.
117