Using the cd-rom drive – Sony PCG-705 User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the CD-ROM Drive
The supplied CD-ROM drive is inserted at the factory. You can remove it
so that you can use other devices in the drive bay.
To insert the CD-ROM drive
1
Turn off the computer.
2
If another device is in the drive bay, remove the device.
There is an Eject lever on the bottom of the floppy disk drive. To
remove the floppy disk drive, slide this lever in the direction of the
arrow.
3
Insert the CD-ROM drive into the drive bay with the label side facing
up.
Drive bay
CD-ROM drive
(supplied)
To insert a CD-ROM disk
1
Turn on the computer.
»^3 vvhen die computer is in system suspend or system save to disk mode, you cannot
insert a CD-ROM disk. See 'Controlling Power Ma.nagement' on page 97 for more
information on system suspend and system save to disk modes.
45