Sony PCG-705 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2
Remove the PC card slot protector.
When you use a Type III PC card, you need to remove both the top
and bottom PC card slot protectors.
3
Insert the PC card into the PC card slot, label side facing up. Gently
push the card into the slot until the card is fixed into the connector.
The release button comes out.
PC card
¿t) Do not fo.te a card into tne slot. It may damage tne connector pins.
If you have difficulty inserting a card, check that you are inserting the card with the correct
To remove a PC card
1
Pull the PC card release button up and press it.
2
Gently grasp the card and pull it out.
3
Insert the PC card slot protector back into the empty slot.
52