Sony LBT-D570 - Manual (Page 14)

1
Chapter 4:
the Tape
Player
Playing a Tape
Recording a CD
Recording a CD: Selecting
Tape Length (tape select
edit)
Recording a CD: Specifying
Tape Length (time edit)
Recording a CD: Specifying
Track Order (program
edit)
Recording From the Radio
Recording From Another •
Tape (dubbing)
Playing a Tape
You can use TYPE I (normal) and TYPE II
(CrCh) tapes. When you insert a tape, the
deck detects the tape type automatically.
SYSTEM
POWER-* ON
7 o
ocrxu r 1 1____H_1
2-^ •ail
n rn n n
1»
£
□<d<c» □«»
<]/[>
1
Press FUNCTION repeatedly until
"TAPE" appears in the display.
2
Press = EJECT to open the tape
compartment.
Insert a recorded tape in deck A or B
with the tape side facing down and the
side you want to play facing forward.
Push to close the compartment.
dual-side, or relay play.
The DIRECTION setting affects both
decks.
To play Press DIRECTION to
select
One side of the
tape
Both sides*
Both decks in RELAY
succession**
* The deck stop automatically after
repeating the sequence five times.
‘"See "To play both decks in succession
(relay play)".
4
Press C> (to play the front side) or <1
(to play the reverse side).
The tape starts playing.
To Press
Stop play □
Pause (DECK B
only) DD
Resume play after
pause DO or <3 or O
Fast forward C>C> for front side <M
for reverse side
Rewind <W for front side t>C>
for reverse side
Remove the
cassette ^ EJECT
To control the remote
1 Press DECK A O or DECK B O to
play the front side and press DECK
A O or DECK B
O again to play the
reverse.
2 Press the desired operation button.
To play both decks in succession
(relay play)
Relay play is according to the following
sequence. When the reverse side of the tape
in deck B finishes playing, the sequence
continues four more times.
1 Press = EJECT and insert recorded
tapes in both decks.
2 Press DIRECTION repeatedly until
"RELAY" appears in the display.
3 Press -<] or O on either deck. To stop
relay play, press □.
To cancel relay
Press DIRECTION repeatedly until "jzir"
or "CZiy appears in the display.
When listening to a tape recorded with the
Dolby* B-type noise reduction system
Press DOLBY NR button so that "DOLBY
NR B" appears in the display.
The settings affects both decks. Dolby noise
reduction system reduces tape hiss noise in
low-level high-frequency signals.
‘Dolby noise reduction manufactured
under license from Dolby Laboratories
Licensing Corporation. "DOLBY" and the
double-D symbol m are trademarks of
Dolby Laboratories Licensing Corporation.
^ I Chapter 4; the Tape Player