Sony LBT-D570 - Manual (Page 9)

To stop playing
Press □ on the CD player (or □ on the
remote).
To cancel shuffle play
Press CONTINUE on the CD player.
To select the desired CD
Press DISC 1 - 5 on the CD player during
'T DISC SHUFFLE" play.
Playing Tracks in the
Desired Order
(program play)
You can program up to 32 tracks from all
the CDs in the order you want them to be
played.
5
1
6
□
2,5
DISC 1 - 5 3 CONTINUE 4
1
Press FUNCTION repeatedly until
"CD" appears in the display.
2
Press PROGRAM.
"PROGRAM" appears in the display.
3
Press DISC SKIP repeatedly (or DISC
1 - 5) to choose a CD.
4
Turn the JOG dial (or press 133 / CSl on
the remote) to choose a track.
The chosen track number appears and
the playing time flashes for about 15
seconds in the display.
5
Press PROGRAM or ENTER/NEXT.
The chosen track is programed and its
number lights up in the music calendar.
If the track number disappears before
you press PROGRAM or ENTER/
NEXT, go back to step 3.
To program additional tracks from the
same CD, repeat steps 4 and 5.
To program additional tracks from
another CD, repeat steps 3 to 5.
Note
• If " appears instead of the total
playing time, this means
-you have programed a track number
which exceeds 20.
-the total time has exceeded 100
minutes.
6
Press CD C> (or CD O on the remote).
All the tracks play in the order you
choose.
To Press
Check the
program CHECK on the remote
repeatedly*'
Program a pause 0 D*^ (QO on the remote)
Stop play □ (□ on the remote)
Cancel the
program play CONTINUE*’
Erase a track from
the end CLEAR on the remote
in stop mode
Erase a specific
track CHECK on the remote
rep>eatedly so the
number of the track
lights up, and press
CLEAR on the remote
Erase a entire
program □ (□ on the remote)
once in stop mode or
twice while playing
*’ After the last track appears, "CHECK
END" appears in the display.
"P" appears in the display and the total
playing time is reset to 0.00.
The program is erased.
To change the order of programed
tracks
Erase the entire program and create a new
one.
The whole program is erased also when:
• you select another play mode.
• you change or remove the CDs.
Playing Tracks
Repeatedly (repeat
play)
The repeat play function repeats a single
CD or all CDs in normal, program, and
shuffle play.
In normal play mode only, the player can
also repeat a single track.
Repeating all the tracks
1
Press REPEAT once so that "REPEAT"
lights up in the display.
cc
mW- - j m J - 0
2 Press CD (or CD O on the remote).
To Press
Repeat all the
tracks on the
current CD CONTINUE repeatedly
until "1 DISC" appears
in the display.
Repeat all the
tracks on all CDs CONTINUE repeatedly
until "ALL DISCS"
appears in the display.
Repeat only one
track (in normal
play only)
REPEAT repeatedly
until "REPEAT 1"
appears in the display
whille playing the track
you want to repeat.
To cancel repeat play
Press REPEAT so that "REPEAT" or
"REPEAT 1" disappears from the display.
Chapter 2: the CD Player I 0